The Kindergarten Idea In Architecture Construction Essay

The Kindergarten Idea In Architecture Construction Essay The kindergarten idea is considered to have initiated as early as the 17th century. The origins of the kindergarten idea define certain attitudes to pre-school education that are still widespread to this day. The early kindergarten idea, which related environmental needs to pedagogical needs, brought about a number of important architectural impulses, both in modernistic and organic forms. John Heinrick Pestalozzi founded the first child-centred institution at Yverdin 1805, based on what became essential kindergarten principles from which several pedagogies stemmed. Fredrick Froebel Philanthropist Robert Owen established a child care institution in New Lanark, Scotland. At the time children over six worked with their parents, therefore the institution only catered for children under six. Staffed by nurses it provided a pleasant atmosphere, although its pedagogical philosophy was unsophisticated. Throughout the 20th century one-off private kindergartens were established in Germany, Britain, Japan and North America. These were based primarily on the Fredrick Froebel philosophy. This philosophy originated from German philosophies in the 19th century. In Froebels hostilic philosophy, kindergartens are complimentary to home life, as appose to replacing it. The Froebel movement spreads to Britain in 1871 when the first kindergarten was built by Sir William Mather. This was followed by the establishment of a free kindergarten for children aged between 3 and 6. Many of these early Froebelian based kindergartens were based on the principles of kindergartens as an educational institution, lacking any architectural form or purpose. A key issue when selecting and appraising educational philosophies is how each system presents information in the development of children. In Froebels system children learn through play as appose to the learn, listen, recite method usually employed. Pedagogical drawing is an important factor. Drawing was seen by Froebel as a form of writing. The gifts and occupations His study of the natural sciences gave him an understanding of the connection of geometric forms to the natural environment such as plant forms and crystals. His work in crystallographic science is said to have persuaded this area of his teaching technique, while his training as an architect influenced the emphasis of precise and unchanging relationships between different things as the central concept of learning. The child plays with one or more geometric gifts to discover its properties and the possibilities for design. Once a standstill is reached the teacher invokes one or more of the categories to compel a new direction of play. In this way the child discovers the designs that are possible with the selected shapes. The occupations developed more intricate and complex skills such as forming shapes from moulding clay, and using sticks and rings laid out as letters as the first step towards writing. Rachael and Margaret MacMillian Some less pedagogical approaches crept in towards the end of the 19th century, as research began into child behaviours by theorists such as Granville Stanley Hall and John Dewey. As this was underway in the USA, closer to home Rachael and Margaret MacMillian began creating an educational philosophy of their own. In 1913, in London they founded an open-air nursery school, based on a more practical approach to child-care. Their approach was to concentrate on the basic needs of children with physical exercise and fresh air as the main priority. Rudolf Steiner The need for imagination, a sense of truth and a feeling of responsibility these are the three forces which are the very nerve of education. Rudolf Steiner was the founder of another educational pedagogy which is still in use today. His controversial thinking can be mainly attributed to some of the facts about his life and the resultant approach to the problem of education. Born in Croatia in 1861, Steiner began finished higher education and continued into further education with the intention of becoming a grammar-school teacher. He failed to complete this course, but went on to study philosophy under Johann van Goethe for several years. He then moved to Berlin and was attracted to the forward-thinking literary Bohemia, the workers movement and the reforming religious thinkers. Here he became leader of a spiritual renewal movement and founder of a philosophical community that was entirely focused on his own personality. In 1919, a defeated Germany brought about innovative thinking and the opportunity for Steiner to try out his ideas on education in a new school. On 7 September 1919, he ceremonially opened the first Free Waldorf School as a combined co-educational primary and secondary school for 256 children drawn mainly from the families of workers at the Waldorf-Astoria cigarette factory in Stuttgart (Germany). Steiners basic ideas on education were conceived in the period between 1906 and 1909 in a manner which to begin with had naturalistic overtones: Out of the essence of the developing individual, ideas on education will grow, as it were, of their own accord. However, in contrast to the path taken by Dewey and Montessori, who sought to establish their New Education on recent ideas of experimental child psychology, Steiner based his educational plan entirely on his cosmic spiritualistic anthropology according to NAME (yyyy), If we wish to detect the essence of the growing individual, we must set out from a consideration of the hidden nature of man as such. In Steiners educational philosophy the educational growth of the child is viewed as a process of rebirth. In a seven-year cycle from the head via the heart to the hands education takes the form of growth and metamorphosis. The educator is seen as the gardener of this growth. From a belief in reincarnation stems the image of education as an aid to incarnation and spiritual awakening. In this case the educator becomes a priest and a healer. With these educational forces, Steiner built the levers that are still being implemented by teachers and educators in his schools and kindergartens today. These educational philosophies can be broken down into three main ideas. First, the intellectual philosophy spread by Froebel, later associated with Naturphilosophy, whereby the childs educational and social development take precedence. The second is the more pragmatic approach created in Britains cities as a result of health concern for young children living in these overcrowded urban areas. This approach is based on circumstances in the past which are not as evident in todays society, namely forced child labour and severe overcrowding in cities. The third is the Steiner pedagogy. The practice of this system of education includes a broad spectrum of artistic and handicraft learning potentials, a caring attitude to children and many opportunities for conscious participation in community tasks. In my opinion Fredrick Froebels approach is far too important to be left to the unquestioning adepts of Rudolf Steiner. Part (ii) While researching the kindergarten as a building type, it was clear that many of the buildings do not live up to the needs of the children, i.e. the learning environment. According to KINDERGARTEN ARCHITECTURE (yyyy) kindergartens and nursery schools are often dealt with as add-on classes to existing primary school education facilities, particularly in Britain, with no real concern for the needs of the child. The importance of the building form and in turn the construction materials is vital to creating an atmosphere that supports the childrens activities, and consequently improving the learning outcomes. The building typology should seek to create an environment that encourages the learning process by addressing issues of emotional and physical well being amongst the children. This concept implies that success in learning at an early age can be linked to the environment created by the materials used and the architectural and structural form of the buildings i.e. a comfortable environment will facilitate the learning process. The kindergarten is the first place where children make acquaintances with new people and new surroundings, and where they become part of a new community. Therefore designing a kindergarten involves not only creating a protective environment for children, but also introducing them to a new space where communication and expression are given free reign. In designing kindergartens, the building form and materials must exploit geometry, colours and images intended to evoke associative meanings within the childs mind. Broadly speaking, in educational facilities in Britain, there are three construction methods used, with varying materials, used either alone or in combination with one another. These are framed construction, load-bearing wall construction and prefabricated construction. Framed construction use steel or concrete columns and beams to support walls and floors. Structural floors are generally reinforced concrete slabs or steel floor panels with concrete laid between them. This type of construction can provide maximum flexibility providing the spacing of the columns allows for the space required for teaching areas. Load bearing wall construction is where walls are designed to carry the load of any additional flooring and the roof. These walls are generally constructed of brick or concrete block. In order for large open plan spaces to exist in these structures additional beams or other load-bearing elements must be employed. Prefabricated construction does not segregate any material. Teaching spaces are fully or partly constructed off-site and brought on-site in a state almost ready for use. The following are a few examples of different kindergartens and there construction techniques. There is much more space allowed for in these modern kindergartens than in any traditional kindergarten buildings. Caesarea kindergarten (Reinforced concrete construction) In many cases building a kindergarten is a way of creating an imaginary world, a space where children receive physical and social exposure to the outside world beyond their home and family. It is in this context that many kindergarten building forms are based. An example of this is the Or-Akiva kindergarten in Miami. Images of the Grasshopper and the Tin Man from the Wizard of Oz were used creating a unique atmosphere to encourage children to architecturally create starting points for their own stories/dreams. In the same way the Caesarea kindergarten in Israel uses a visually striking faà §ade of three elephants which relate to the archaeological site on which it is built, and the ancient Roman city known also as Caesarea. Images taken from the architects website (Knafo Klimor Architects) can be viewed to the right and below: http://www.kkarc.com/images/Publications/59.pdf The building is constructed of reinforced concrete. As with any RC structure, the material permits an especially flexible design, which has allowed the freedom to create this remarkable faà §ade. Kindergarten Sighartstein (Steel frame construction) The Kindergarten Sighartstein, Austria, is an example of the use of a contemporary steel frame structure. Designed by Kadawittfeldarchetektur, a German practice, this building makes use of metal cladding elements with the concept of kindergarten-in-motion. The images below taken from the Kadawittfeldarchetektur Architects website show the external faà §ade: http://www.nikiomahe.com/architecture-design/kindergarten-sighartstein-in-austria-by-kadawittfeldarchitektur/ The green metal elements are designed to replicate blades of grass, integrating the building into the surrounding area of green meadows and fields. The premise is to create a built playground. Internally the building is split into two horizontal layers. The steel structure affords large open plan central hall which can be seen in the image below: This is the mid-point of the building and it serves as the multifunctional interactions space a communicative core for both children and careers located at the intersection between functions. Large glazed sections and openings onto the courtyard create a valuable connection to the external surroundings. The flat roofed two-story cubic building optimally distributes the functions of a kindergarten. On the ground floor, one finds the space for the kindergarten groups, with the crà ¨che accommodated in the protected upper story. In the crà ¨che, an expandable third space has been made possible through a planned reallocation of the space. Eco-Kindergarten (Prefabricated construction) The Eco-Kindergarten was designed by C.F. Moller Architects in demark. The building is constructed from pre-fabricated wooden insulated wall segments, with large glazed facades providing daylighting and passive solar heating. A touch-screen at the entrance informs parents about the current energy-performance, and provides information from the pedagogues. It is a sustainable and well though through pedagogical design. The fundamental architectural concept is a simple and clear geometric form on two levels, with the childrens areas located in the best-lit southern end. The two levels are linked by staircases and ramps which are designed to stimulate and challenge the childrens sensory and motor skills. There is a pedagogical idea throughout the interior design. It is all based on the notion that children enjoy attractive and challenging environments in which to learn. An image of the main entrance is shown below: http://www.bjoku.com/search/eco+kindergarten+design+by+c+f+moller+in+denmark Another example is the small alcoves built into various parts of the building where children can enjoy their own spaces to play, read or just be alone. The materials used and the architectural form of the building creates a healthy safe environment for the children, including the reduction of the possible spread of influenza among both children and adults. The highly insulated construction will consume under 20% of the energy used in a standard building of this size and function. Kindergarten Barbapapa The Kindergarten Barbapapa by CCD Studio is an example of timber and steel combined in a building construction. The building makes use of vibrant colours throughout. http://www.archdaily.com/45766/kindergarten-barbapapa%CC%80-ccd-studio/ Lucinahaven Toulov Childcare Another example of a kindergarten building form is the Lucinahaven Toulov childcare centre in Denmark. It was designed by CEBRA, a Danish group who have specialized in several kindergarten designs. http://www.archdaily.com/46255/lucinahaven-toulov-childcare-cebra/ The building is divided into 6 different sections. Each section is hexagonal in shape, making up the overall shape of a flower. The yellow centre of the daisy is the kindergartens central activity room. Attached to the centre are the petals housing the staff rooms and 6 group rooms 2 in each hexagon. Part iii) The design concept is decisive for the creation of a successful timber structure. We understand design concept to include the architectural idea, the interior layout, and technical measures. An early decision regarding the choice of loadbearing system and the associated conceptual and constructional considerations, together with fire protection and sound insulation plays a key role in the design process. At the same time, the systems for thermal performance, airtightness, and moisture control, the needs of the building services, measures concerning durability, maintenance, and the operation of a building, right up to its end-of-life deconstruction, must all be considered. For design and construction teams it is vital to link the demands of the project with the possibilities and limits of the technical concepts in such a way that a credible whole ensues. The basic timber building systems are: Log construction Timber-frame construction Balloon- and platform-frame construction Panel construction Frame construction Solid timber construction Log construction, timber-frame construction and balloon/platform-frame construction are the traditional forms of timber construction which are a rarity in recent years. With regards new builds, they are mainly found in isolation on a residential scale. The building systems that currently dominate todays market will be dealt with in detail. It is important to state that these systems can be used in combination with one another. For example pre-fabricated panels could be used for a building component such as the walls, alongside solid timber constructed floors.These are: Panel construction Frame construction Solid timber construction Panel Construction The basic idea behind modern panel construction relates to prefabrication in the factory, where various wall, floor and roof assemblies are planned and manufactured as elements to suit different building uses. As was customary with the forerunner to panel construction the platform frame structures built using panel construction are planned, designed, manufactured and erected storey by storey. Panel construction, grew out of balloon-frame and platform- frame forms of construction. The external appearance of buildings designed for this form of construction does not generally conform to the traditional western idea of a timber building. The load-bearing ribs of panel construction are completely concealed, both inside and outside. Facade cladding is usually wood-based board products or solid timber, with good, long-lasting protection in the form of opaque surface treatments. Opaque paint gives very good protection. The only disadvantage with opaque paint is the fact that when the natural colour of wood is covered, it is generally more labour intensive and lengthy to carry out maintenance. This may not be an issue in kindergarten construction as holiday periods are quite long. The VOC of treatments should be kept to a minimum as buildings are becoming increasingly air tight and health risks may amplify with younger children involved. The structural carcass of a building in panel construction is in some locations finished with a thermal insulation composite system (insulation and render). The inner lining of the walls is made up of wood-based board products, gypsum fibreboard, or plasterboard plastered white and then finished with a coat of paint or wallpaper. Sound and fire protection solutions may be an issue (especially for a kindergarten) without the proper detailing. However, once an adequate solution is reached, the repetitive detailing of this form of construction makes designing straightforward. For a kindergarten on site such as Craiglockhart the general consensus for cost purposes would be a single or two storey structure, although multi-storey construction is possible using panel construction. Due to the standardisation of member sections, modular dimensions, connections and construction details, panel construction represents a simple timber building system. Another feature of panel construction is the design freedom which it allows. Internally the spaces can be divided in any manner required. Frame construction The use of modern frame construction in large-volume one and two storey buildings is becoming more and more widespread. This form of construction allows for widely spaced columns in timber or in combination with steel or reinforced concrete. New linear wood-based products and their connection techniques have contributed to this growing importance. Modern frame construction in timber includes primary structural members erected on a widely spaced grid between which the internal and external walls can be positioned as required and constructed using a variety of methods and materials. Therefore frame construction is a method of building in which the functions of load-bearing structure and enclosing walls are clearly separated. Frame Construction is understood to be an independent, modern form of timber construction with the following characteristics: a form of construction comprising columns, beams and bracing elements placed on a regular grid to form a load-bearing structure. This primary structure supports the suspended floors made up of timber joist floors or planar, prefabricated elements which are classed as the secondary structure. The walls enclosing the interior spaces can be installed independently of this load-bearing framework because they do not carry any loads, making large windows and glass facades possible. Wherever possible, the load-bearing structure of a frame building in timber is placed on the inside of the external walls for constructional reasons (protection from the weather and airtightness of the building envelope) and also left exposed internally. The enclosing envelope can therefore be placed around the building without joints or seams. Internally, the arrangement of the load-bearing components determines and emphasizes the architectural character. In frame construction, besides the efficiency, it is first and foremost the architectural diversity and the clarity of the constructional form that is so appealing. This is important as design of a building of this type with the freedom of a large site may result in some extreme suggestions for the building envelope. The use of individual columns in frame construction concentrates the loading. Longer spans are permitted with fewer internal columns than other timber building systems, which leave plenty of freedom for the design of the interior layout. Timber members are generally left exposed in the finished building so the use of glued laminated timber is usually preferred. There are several different forms of timber frame construction which are chosen depending on the loads imposed, the grid and the architectural form of the building. Columns and compound beams This form of construction with columns supporting compound beams has a primary structure consisting of one-part columns and two-part continuous beams, and is frequently used because of its simplicity, which leads to an overall economic solution. Beams and compound columns In this form of construction the one-part beams are connected to the continuous two-part columns by means of mechanical fasteners. Construction using this method is often preferred owing to the architectural design options. Columns and over-sailing beams The simple form of construction with one-part columns and beams is suitable for single-storey flat-roof structures Beams and continuous columns The primary structure of this form of construction consists of continuous columns and main beams designed as simply supported beams spanning between the columns. This system is particularly suitable for structures whose structural frame lies on the inside of the building envelope with the external walls subsequently fixed to the outside of the structural frame so there are no horizontal load-bearing members penetrating the building envelope. Forked columns The primary structure is in the form of a one-part continuous beam supported on storey-height columns. The columns are connected together via the forks. Higher loads can be carried because timber sections carry loads parallel to the grain. Besides clear, preferably simple load paths, the straightforward transfer of loads into components and down to the foundations, plus the bracing of the structure, are key aspects. The flexible nature of this form of construction, along with the use of glued timber members means that it fulfils demands regarding quality and engineering, and makes it an excellent choice for kindergarten construction. Solid timber construction There have been new systems developed in solid timber in recent years. This is mainly due to the introduction of large-format elements into the industry. The components are generally of solid timber which has been glued, dowelled or nailed together. These elements make up the load-bearing core which is at the heart of all solid timber buildings. The thermal insulation is attached to the outside of the structure, and solid timber components absorb moisture from the interior air, store this, and release it again during drier periods. Usually the structure is constructed storey-by-storey; however continuous walls with suspended floors are also possible. Either way solid timber construction offers an efficient load-carrying performance. Early involvement of specialist engineers is essential early in the design stage. There are a number of different systems which are used in solid timber structures. These include: Solid cross-sections Depending on product and manufacturer, we distinguish between single-ply or cross-banded glued, dowelled or nailed, and single- or multiply cross-sections. Softwood (spruce, fir) plies or laminations form the raw materials for these elements; alternatively, the large-format components can be made from wood-based products (particleboard, OSB, etc.). The elements pre-assembled in the factory to form walls complete with the necessary openings for doors and windows, accurate and ready for erection. Suspended floors, too, can be built using the same systems and the same methods, but different forms of construction can be combined in the same structure. Cross-laminated timber Cross-laminated timber consists of several plies of cross-banded glued planks. The raw materials are spruce or fir planks. Assembling these as cross-banded plies produces planar loadbearing elements that can carry loads in both directions with excellent dimensional stability. Edge-fixed timber Edge-fixed timber elements are made up of planks (laminations) placed on edge which are normally continuous, i.e. no joints, over the full length of the element. Finger joints in the length are also possible, therefore making larger element formats possible. Laminations are normally between 20 and 50 mm thick. In order to transfer the shear forces in the transverse direction and to distribute individual loads, the laminations are interconnected with nails or hardwood dowels. Cross-banded and dowelled Dowelled solid timber elements consist of a 60-80 mm thick core of vertical planks to which several plies of softwood planks 20-50 mm thick are attached horizontally, vertically and diagonally on both sides by means of dowels. Owing to the cross-banded, sometimes also diagonal, arrangement of the plies, these elements can help to brace a structure against horizontal loads. Cross-banded spaced plies The elements are made from cross-banded glued boards which are positioned at a certain pitch with gaps in between. This creates coordinated cavities which offer space for building services but also thermal and/or acoustic insulating materials. Such elements are available for walls, suspended floors, and roofs. Part (iv) Prefabrication and industrial production are gaining importance nowadays as they reduce the number of man-hours on site. The definition of prefabrication is the off-site pre-assembly of individual elements to form complete components. In timber construction there is always some form of prefabrication, although modest in most cases. Off-site industrial fabrication on a small or large scale has now enabled timber to become a serious contender for structures on a larger scale such as this. Three basic systems in timber building prevail when trying to maximise the amount of off-site work: panel construction, solid timber construction, and, for larger structures, frame construction. Panel construction allows for enclosed components such as partitions and suspended floors to be pre-fabricated with the loadbearing elements, with the option to include windows, doors and in some cases even building services in a single building module. In contrast with this frame construction has a clear separation between the load-bearing structure and enclosing elements. So the two-dimensional elements for suspended floors, walls, and roof are generally added to the load-bearing structure in a second phase of construction. But as with panel construction, frame construction also permits the whole range from minimum prefabrication right up to the complete incorporation of doors, windows, building services, facade and so on, for the non-load-bearing, enclosing components. The various fabrication or prefabrication stages govern the degree of prefabrication building components have when they leave the works, and how erection on the building site is to be carried out. A high degree of prefabrication could be achieved if the facade construction and facade cladding are also added off-site, and, if necessary, the internal lining is attached. The surface finishes could even be applied; however, this requires a high degree of protection of the components during transport and erection to avoid any damage. The advantages of off-site fabrication for the kindergarten will depend on the technologies available during planning, production, transport, and erection. In recent years the planners and manufacturers prefabricated building components or prefabricated houses have pushed back the boundaries of optimum prefabrication further and further. The building components may be delivered to the building site virtually as complete, finished units, including building services and often the internal furnishings and fittings. Part (v) As with any educational building the cultural benefits to the surrounding area will be very influential. In addition to providing for basic education for children, they serve as social and cultural centres. They are places for sports, theatre, music, and other social, cultural and recreational activities. The cultural benefits of using timber for a kindergarten may be gauged by looking at the building from the childs perspective. When designing a kindergarten the architect must look at the world through the eyes of a child. The architect must consider the scale of the building and how it is perceived by the child. The warmth created by using exposed timber elements throughout the interior of the building would, for instance, create a Good architecture should imply good function as well as good aesthetical and structural design. CULTURAL BENEFIT: Visible timber In addition, the timber sections employed and the board-type wood and gypsum materials used can always be supplied in good quality at short notice. By integrating environmental design issues that are traditionally ignored in contemporary schools, like natural ventilation or daylighting, the school becomes less of an institution and more like a home. are state-regulated square footage requirements. Contemporary school design rarely reflects a desire to create an environment where learning could be encouraged by the building itself. Part (vi) The importance of the environment created by the building form and its use as an educational tool is very important. An example of the building form as an educational tool is the use of a childrens book as a pedagogical feature representing a communication between the childs world and the strange outside world. The imaginary spaces contained

School Based Dental Sealant Programs Health And Social Care Essay

School based alveolar consonant sealer plans have been spread outing throughout schools in the United States. These plans benefit the kids in forestalling disease and besides profit the health care system. So why is it that so much attending is being brought to sealing cavity and crevices in school aged kids? We will research dental sealers, school based plans, and how these plans benefit the professional universe of health care. Body 1 Sealants do non extinguish cavities but aid to protect the dentition from developing cavities. ( Gooch et al. , 2009 ) . Dental sealers can be compared to a plastic like surfacing which bonds to the occlusal surface ( Tomar, & A ; Reeves, 2009 ) . Sealants should be applied before the patient is at hazard for sing dental cavities ( Aleksejuniene et al. , 2010 ) . When puting a sealant many things must be taking into consideration, including location, eruption position, and cavity and crevice morphology. Newly erupted, immature tooth enamel is susceptible to cavities because the enamel is more permeable and has a really high organic content degree. It is critical to protect freshly erupted dentition because it increases the overall length of service of the tooth ( Aleksejuniene et al. , 2010 ) . Dental cavities normally form in topographic points where plaque has lingered for an drawn-out sum of clip ( Fontana et al. , 2010 ) . About 90 per centum of cavities in kids are found in cavities and crevices of lasting posterior dentitions with grinders being the most susceptible ( Gooch et al. , 2009 ) . Although sealers are normally effectual at forestalling dental cavities sometimes things go incorrect with sealant arrangement and do the sealers to neglect. Sealants fail on different surfaces of the dentition and besides increase with multiple sealers ( Aleksejuniene et al. , 2010 ) . Sound and noncavititizd cavities and crevice surfaces are normally sealed with more importance placed on the posterior dentition ( Gooch et al. , 2009 ) . The success rate on the lasting first grinders is higher than compared to the 2nd grinders. Mandibular dentitions and mesial sites retained sealers better than maxillary dentitions and distal surfaces. The most common ground for sealant failure is taint of the sealant country with spit. Other factors besides contribute to sealant keeping including experience of the clinician and the cooperation of the client. Puting a dental sealer over cavities is a better option than dental disregard or extraction. ( Aleksejuniene et al. , 2010 ) . If non restored, dental cavities will take to trouble, infection and perchance impaired map ( Tomar, & A ; Reeves, 2009 ) . Children are non placed at a higher hazard for cavities if they missed a planned reapplication of the sealers. Sealant arrangement can be reversible if needed and allows for the tooth doctor to put Restorations on the tooth if necessary ( Gooch et al. , 2009 ) . Body 2 The benefits of puting sealers on dentitions have been established, so how is the United States implementing this School Based Sealant Programs are by and large aimed toward low income kids. Child from lower income households are less likely to have alveolar consonant attention when compared with higher income households ( Aleksejuniene et al. , 2010 ) . Families below the federal poorness threshold are twice every bit likely to develop cavities as kids whose households are above the federal poorness threshold. Children from lower income households typically consume cariogenic diets, have low fluoride consumption, have histories of old cavities and besides infrequent dental visits ( Aleksejuniene et al. , 2010 ) . Merely about 20 per centum of kids from low income households have received sealers as compared to forty per centum in higher income households ( Gooch et al. , 2009 ) . Targeting specific races or degrees of income can be considered favoritism. Programs must measure which kids do non have regular alveolar consonant attention and integrate these plans to aim these populations ( Siegal, & A ; Detty, 2010 ) . When implementing school based dental sealant plans cost must be taken into consideration ( Aleksejuniene et al. , 2010 ) . It is more effectual and cost conservative to aim populations instead than single kids. Most plans do non hold the support to seal all posterior dentitions, therefore operators must measure the dentitions and determine which teeth are at highest hazard. Programs typically target kids who are in first class to seal first grinders and 6th class to seal 2nd grinders ( Siegal, & A ; Detty, 2010 ) . The operator so must utilize selective sealer applications. The ratio of Restoration to sealant cost is 12:1, which means overall it is cheaper to put sealers than to put Restorations in the dentition ( Aleksejuniene et al. , 2010 ) . School based alveolar consonant sealant plans tend to aim populations that are at the highest hazard for dental cavities. The most common manner used to find which populations are at high hazard is finding the per centum of pupils who are enrolled in the free or decreased monetary value repast plans. Parents of kids in these schools are normally asked to make full out studies in which the followers is reported: whether the kid is enrolled in a free or decreased meal plan, if the childaa‚Â ¬a„?s chief beginning of attention is through Medicaid, or if they are uninsured. Planners so use these studies to measure which schools have kids at higher hazards ( Siegal, & A ; Detty, 2010 ) . Although the operator accesses each single kid the cavities risk appraisal is done at a group degree ( Fontana et al. , 2010 ) . Parental consent is needed in order to supply the kid with sealers. Timing of ratings of the keeping of the sealers depends on many factors including: the plan aims, alterations in dental stuffs and techniques, and motion of pupils. It has been found that sealers cut down dental cavities by 70 eight per centum one twelvemonth after arrangement and 50 nine per centum after four or more old ages. School based dental sealers are portion of a comprehensive attack to cut down the communityaa‚Â ¬a„?s hazard of kids developing cavities ( Gooch et al. , 2009 ) . Body 3 Through school based dental sealant plans kids receive the benefits of having the sealers while pupils deriving cognition, compassion, and understanding from the experience. These plans provide kids with needed attention that they otherwise would non be able to have. Though these larning experience pupils will normally go advocators for school based dental sealers in more schools in their local countries or hometowns ( Aleksejuniene et al. , 2010 ) . Programs such as the school- based dental sealant plans besides help pupils to understand dental wellness disparities. These plans besides help pupils in being comfy functioning many diverse populations & A ; have been shown to positively act upon the studentaa‚Â ¬a„?s attitude towards community service ( Holtzman, & A ; Seirawan, 2009 ) . Four handed dental medicine is frequently required, giving the pupils the chance to work together and derive apprehensions from each other ( Gooch et al. , 2009 ) . Students work in squads in connexion with the instructors to measure the demands of the patients and this helps to develop communicating between health care suppliers. In add-on to supplying school based dental sealers pupils should experience a duty to educate both kids and grownups in proper unwritten wellness attention. In the 2007 financial twelvemonth, eighty five per centum of describing provinces have a dental sealant plan in topographic point. The figure of kids being served by these plans has about doubled from 2000 to 2007 ( Holtzman, & A ; Seirawan, 2009 ) . Decision The enlargement of school based dental sealers has been on the rise in the United States. With progresss kids are able to have the basic attentions needed in order to assist them better protect their dentitions. It is promoting to see the figure of kids profiting from these plans continues to lift. The benefits of cavity and crevice sealers in kids have been proven to be a preventive attack to dentistry. As these plans continue to develop every bit good as become educated. As people continue to go more cognizant of the benefits funding for these plans in schools will go on to lift. Sealants will assist to relieve childrenaa‚Â ¬a„?s emphasiss about sing the tooth doctors.

Privacy Issues in the Banking Industry - 1946 Words

Introduction With the improvement of technology continuously growing every day, privacy has become one of the most important issues in today’s society. Privacy refers to one’s right to control how your personal information is collected and used by financial institutions. It is the financial institution’s responsibility to provide security to your personal information. Security refers to the obligation of the company that collects and uses your information to ensure that your information is safe against unauthorized uses (Privacy Rights Clearinghouse). For the banking industry, identity theft is a growing concern for customer privacy. Identity theft can occur anywhere including the internet. The technology of online banking is†¦show more content†¦The GLB Act, especially, was not designed to protect the consumers alone. Instead, I think it is designed to protect both the business and consumer world. From a business perspective, it is important to yield a net proftiprofit. When financial institutions share customer information with other affiliates, it is with an objective of money-making in mind. Hence to please the customer, the GLB Act added an â€Å"opt out† option to its regulations for consumers if they do not want their information to be shared. There is nothing else that a consumer can do to prevent financial institutions from sharing their information. This loophole within the regulations that do not fully protect consumer privacy and does not give the consumer total control over how their information is shared. The ability to protect one’s private information is limited. It places the burden on the consumer to protect their own privacy. And they only have one option, which is to â€Å"opt out†. With the GLB Act, banks and financial institutions are left on their own to develop an appropriate security program that is suitable to the business . In the end, there are no standards to decide whether the security program is suitable enough or not. The GLB Act alone only acts as a guideline for banks to follow to cover privacy concerns instead of a mandatory rule toShow MoreRelatedLegal Ethical and Regulatory Issues1479 Words   |  6 PagesRegulatory Issues The online banking industry is a growing and a continually evolving business. This paper will identify and describes the legal, ethical, and regulatory issues that impact online banking the Websites. Business ethics examines ethical rules and principles within a commercial context involved in e-commerce are faced with the same if not more legal issues as any other business; these issues include, but are not limited to jurisdiction, contract, and legitimacy in the banking. BanksRead MoreThe Banking Industry And Cloud Computing Essay1701 Words   |  7 PagesThe Banking Industry and Cloud Computing Banks are facing increased pressure to streamline their current processes and trim operating costs, while also responding to more demanding, digitally connected customers (Adams, 2012). Many banks are even looking at new technologies and IT delivery models such as cloud computing to help address these issues. Banks have many reasons to like the cloud, such as cost efficiency, standardization and consistency (Dragon, 2013). Banks are embracing the cloud moreRead MoreTechnologys Impact On Society1099 Words   |  5 Pages Date Technology’s Impact on Society in the Banking World Technology s impact on society has changed in many areas of our lives. Technology has changed travel, you can now book your own plane ticket without going to a traveler’s agency, schooling you can take classes online, and have access to doctors and medicine without having to leave your home. I chose to write about the topic of banking. With the help of technology banks are able to reach out to more customers and provide better servicesRead MoreThe Motivation Model857 Words   |  3 Pagesdecrease trust to adopt internet banking. People who are living in low income and developing countries such as Pakistan, Bangladesh and India have to deal with many problems such as poverty, corruption and weak legal structure, all of these problems will lead to distrust in their lives. Similarly, the technology that deals with finance and money is going to be difficult to adopt by people who lives in low income countries due to lack of trust. Trust on internet banking system and security h as to beRead MoreGlass Steagall Act For Banks And Securities1549 Words   |  7 Pages Glass-Steagall Act for Banks and Securities The banking and securities industries had regulations since the 1930s or earlier. The laws were there to help regulate and give depositors some security. For one reason or another, the law has been changed, updated or appealed. The Banking Act of 1933, known as the Glass–Steagall Act named after the Congressional sponsors: Senator Carter Glass, a former Treasury Secretary and Senator Henry Steagall (Heakal). The Glass-Steagall Act foresaw problemsRead MoreSecurity Threats That Bank Of America Faces Today846 Words   |  4 Pagescomponents of the web. Discussions on BoA safeguard against legal issues will be addressed followed by the types of social data that potentially cause problems for this bank institute. In conclusion, I will explain the legal, ethical, and regulatory requirements Bank of America utilize for the protection of the organization. Bank of America is a multinational banking institute and one of the most trusted in the banking industry. This organizations sole purpose is to protect the customer’s confidentialityRead MoreBig Data And Its Privacy Issues1452 Words   |  6 Pages BIG DATA AND ITS PRIVACY ISSUES BY KAVITA AMIT KUMAR â€Æ' Abstract: With growing technology and globalization, the volume of data is increasing day by day. Big Data world is drowning in data that is generated every day. Big Data provides us with valuable data and this in turn raise concerns how to maintain this data. Think about your daily data footprint. Say for example your every action on web is being monitored like website you visit, queries you make through search engine, all type of transactionRead MoreImportance Of It For Banks1095 Words   |  5 PagesImportance of IT for Banks Emerging new technologies have changed banking industry from paper and branch based to digital and networking banking services. Banks need IT for many reasons. They have to massive amount of information to provide better services and gain competitive over their competitors. Some previous and known roles of IT in banking system are listed below: E- Banking: A special kind of software GUI (graphical users interface) has enabled customers to access their bank detail anywhereRead MoreBeing The Chief Security Officer1107 Words   |  5 Pagesof client information leads to loss of privacy and also money when it comes to banks. In the field of health care HIPAA privacy rule has to be followed. This rule states that the patient’s information has to be disclosed to the people treating them that too only necessary amount of information has to be disclosed. To ensure that patient doesn’t feel uncomfortable about disclosing their information they have to aware about this rule. When it comes to banking. The user’s credentials must be availableRead MoreWebsite Group #3 – Companies Who Use Crm. Middleton (2017)1221 Words   |  5 Pagesnew volunteers with minimal IT involvement. (â€Å"American Red Cross,† n.d.) Governmental organization. The Malta Gaming Authority (MGA) is committed to promoting responsible playing and safeguarding players’ rights while fostering the growing gaming industry. Using the web-based portal, gaming operators will be able to monitor the exact status of their applications, which will bring greater efficiency and visibility to the process. In 2015, it became the first gaming regulator worldwide to offer direct

Essay Schizophrenia as a Biological Disorder - 798 Words

Schizophrenia as a Biological Disorder As well as the biological approaches there are physiological, psychological and environmental explanations. New theories of schizophrenia are constantly being developed each having their own advantages and disadvantages. How do we know however, which one is correct? The biological explanation suggests that schizophrenia is produced by an unfortunate combination of genes or is due to physical problems in the brain. Researchers favouring the biological explanation look at genetic factors, brain structure and biochemical explanations. Many researchers would suggest that the debate over whether schizophrenia is passed down through genetics is no longer a†¦show more content†¦This can also be accounted for distant relatives who are unlikely to share the same environment. We can therefore assume that to confirm a genetic base for schizophrenia, research must separate genetic influences from environmental influences. In order to do this, researchers must look at the evidence presented through twin studies. A set of MZ twins share the same genes, therefore if only one of the develops schizophrenia, it is more likely to be through environmental factors. If genetic factors are of prime importance then MZ twins should show a higher concordance rate than DZ twins. This is in fact the case, and MZ twins are two to four times more likely to develop schizophrenia than DZ twins. Again, a way of cutting out the environmental factor of upbringing can be seen in adoption studies. Children born from a mother with schizophrenia and separated 3 days after birth are still more likely to develop schizophrenia regardless to their split. Studies have also been carried out to test the importance of environment itself, however very little evidence can be found. Children (non schizophrenic) were adopted by individuals that later developed schizophrenia. As the child does not share any genes with the adopted mother/father, the environment is the only point that could determine whether or not they develop schizophrenia. There were extremely low or even noShow MoreRelatedOutline and Evaluate One or More Biological Explanations to Schizophrenia1149 Words   |  5 Pagesand evaluate one or more biological explanations of schizophrenia (8 marks AO1/16 marks AO1) Schizophrenia is classified as a mental disorder that shows profound disruption of cognition and emotion which affects a person’s language, perception, thought and sense of self. The dopamine hypothesis states that schizophrenic’s neurones transmitting dopamine release the neurotransmitter too easily, leading to the characteristic symptoms of schizophrenia. This hypothesis claimsRead MoreThe Biological And Psychological Explanations Of Schizophrenia1405 Words   |  6 PagesIn this essay I will try to explain schizophrenia and talk about the main biological and psychological explanations, also showing how similar and different they are. Schizophrenia is defined in the oxford dictionary as a long-term mental disorder of a type involving a breakdown in the relation between thought, emotion, and behaviour, leading to faulty perception, inappropriate actions and feelings, withdrawal from reality and personal relationships into fantasy and delusion, and a sense of mentalR ead MoreDescribe Two or More Psychological Explanations of Schizophrenia725 Words   |  3 PagesDescribe two or more psychological explanations of schizophrenia 8+16 marks A01 A02 Sociocultural AO2 Cognitive Introducing Biology The cognitive explanation acknowledges the role of biological factors in schizophrenia, suggesting that the basis of the condition is abnormal brain activity producing visual and auditory hallucinations. Further features of the disorder emerge as people try to make sense of the hallucinations. When schizophrenics first experience voices and other worrying sensoryRead MoreOutline and Evaluate Two or More Biological Explanations of Schizophrenia.1443 Words   |  6 PagesThere are two main biological theories which explain the assumed causes of schizophrenia: Genetic and Dopamine Hypothesis. Research by Mikaywa et al has found that there must be a genetic explanation of schizophrenia due to the fact that concordance rates for environmental causes are not 100%. Also Mikaywa noticed that schizophrenia runs in the family, meaning there must be something other than environmental causes, causing the disorder. What Mikaywa studied was DNA from human families who wereRead MoreSchizophrenia/Psychosis/Life Span948 Words   |  4 PagesSchizophrenia and Psychosis and Life Span Development Paper Shanda Walton University of Phoenix October 20, 2008 Schizophrenia translates as split mind and the psychological changes can be so profound that the affected individual is thrust into a world that bears little resemblance to everyday experience. The person with schizophrenia lives in an internal world marked by thought processes that have gone awry; delusions, hallucinations, and generally disordered thinking become the normRead MoreMental Disorder And Its Effects On Schizophrenia1131 Words   |  5 PagesAbstract: Schizophrenia is one type of mental disorder .There are three types of symptoms like positive , negative and cognitive. It creates hallucinations, delusions and interacts to thought process of persons. Though it is a treatable but it affects person’s ability in to reality. There are many factors which affect the schizophrenia like biological factors, psychological factors, sociocultural factors. Among them in biological factors, age and sex highly affected to Schizophrenia. The psychologicalRead MoreSchizophrenia: Its Aetiology Essay982 Words   |  4 PagesSchizophrenia: its Aetiology Lesley Stevens and Ian Rodin justified the need of acquisition to the mental disorders’ aetiology in their book â€Å"Psychiatry†. They pointed out the fact that psychiatrists need to be familiar with the contribution of a particular disorder in order to make a more confident in the diagnosis. Knowing the aetiology of psychotic disorder is as important as the diagnosis. For the simple reason that psychotic disorders do not have particular tests that can be made for diagnosis;Read MoreSymptoms And Symptoms Of Schizophrenia1677 Words   |  7 PagesAccording to the DSM IV-TR. Symptoms of schizophrenia, include meeting three criteria: need to have two or more characteristics symptoms such as delusions, hallucinations, disorganized speech, grossly disorganized behavior/catatonic behavior or negative symptoms such as blunted affect, alogia, or alovitian which was evident in this film.. In addition to these symptoms, the individual must also display a social or occupational dysfunction, such as a disturbance in functioning in his work, interpersonalRead MorePsy Chological And Social Factors1698 Words   |  7 Pagespredicted by biological, psy-chological and social factors; a theory widely used in the 1940s. Thus disproving the original medical definition that health is simply the absence of disease. The World Health Organisation defined health as â€Å"the state of complete physical, mental and social wellbeing, and not merely the absence of disease and in-firmity in 1948† (WHO, 2006). Schizophrenia According to WHO (The World Health Orangastion Schizophre-nia is defined as: Schizophrenia is a severe mentalRead MoreA Comparison of Biological and Psychological Explanations of Schizophrenia531 Words   |  3 PagesA Comparison of Biological and Psychological Explanations of Schizophrenia Both the biological and the psychological explanations of schizophrenia are supported by empirical evidence which justify their explanations. However ,within the biological explanation there is the genetic explanation which is used largely based on scientific research such as that of Gottesman’s research using meta-analysis which looked at the family (including twin) relationships and concordance